| MODEL |
60KW |
120KW |
180KW |
| INPUT |
| Nominal Input Voltage |
380 VAC ± 15% |
| Acceptable Input Voltage Range |
3-phase, 3ph + N + PE |
| Working Voltage Range |
50 - 60 Hz |
| Maximum Input Current |
100A |
260A |
300A |
| Frequency Range |
<= 5% |
| Input Power Factor |
> 0.99 @nominal voltage (100% load) |
| OUTPUT |
| Output Current Range (based on 2-output) |
2 ~ 200A |
2 ~ 250 A |
2 ~ 250 A |
| Output Voltage Range |
200~750VDC (600~750VDC in constant power mode) |
| Power Module |
30kW x 2 pcs |
30kW x 4 pcs |
30kW x6 pcs |
| Efficiency |
> 94% |
| Module Output Current Unbalancce |
< 5% |
| Module Output Voltage Ripple |
< 0.5 |
| Module Output Voltage Precision |
< 0.5% |
| MModule Output Current Precision |
< 1% |
| Connector Single Mode (max.) |
CCS2 (60kW) ChAdeMO (50kW) |
CCS2 (120kW) |
CCS2 (180kW) ChAdeMO (50kW) |
| ChAdeMO (50kW) |
| Connector Double Mode (max.) |
CCS2 (30kW) ChAdeMO (50kW) |
CCS2 (60kW) |
CCS2 (90kW) |
| ChAdeMO (50kW) |
ChAdeMO (50kW) |
| Power Distribution |
Single plug mode / Average output mode |
| PROTECTION |
| Charger Safety Protection |
Over/Under voltage, overload, output power limit function, short circuit, anti-access, earth leakage, lightning and overheat |
| protection |
| Interface Safety Portection |
Circuit discharge function, insulation monitoring device (IMD) and battery reverse parity protection |
| USER INTERFACE |
| Status Indiators |
Power on, charging and fault |
| Communication Protocol |
OCPP 1.6 |
| Connection Communication Mode |
In accordance with DIN 70121 and ISO 15118 standard |
| Connection Standard |
CCS2 (IEC61851-23) and CHAdeMO 1.0 |
| ENVIRONMENT |
| Operating Temperature |
-25°C to 50°C |
| Humidity |
0 - 95% (non-condensing) |
| Altitude |
< 2000m |
| Noise Level |
<65dB |
| PHYSICAL |
| IP Protection |
IP54 |
| Cable Length |
5m |
| Dimension, D x W x H (mm) |
750 x 530 x 1685, excluding plug and cable |
| Net Weight (kgs) |
275 |
310 |
328 |
Audited Supplier 
){kind=link}
){kind=link}