NASN rectifiers
NASN rectifiers bring advanced technology to the DC power industry. Innovative engineering combines the best in efficiency and reliability to meet the power requirements for a variety of system applications. This rectifier is specifically designed to recharge all types of stationary batteries for large utility, petrochemical and industrial uses.
The fan cooled rectifier module has extremely high density providing the most power in the least amount of space. A compact shelf accommodates four rectifiers per 19in 2U shelf and can be paralleled up to 5*2U 19in shelf.
Local and remote setup, adjustment and control is a simple, single-step process with the rectifier System Controller. By utilizing TCP/IP technology, complete configuration and monitoring of power equipment is possible through a Windows Internet Explorer browser.
We can provide turnkey solutions for outside plant, headend, telecommunications, industrial and renewable energy applications. We work to combine your small-, medium- and large-scale projects with the necessary installation resources.
Features:
1. Switch Mode Power Supply;
2. Hot swappable and Plug and Play;
3 .N+1 redundancy,each module available in 50A@48Vdc;
4 .AC /DC distribution system for AC input/ DC output distribution and protection;
5.RS232, RS485, SNMP communication for remote control;
6.Compact design and embedded modular system, support power system and module sleep, efficient mixing, energy saving;
7.High Efficiency with low EMI. CE Safety and EMC certification
8.Protection for Input and output over /under voltage,short circuit and over temperature
Applications:
Vehicle and shipboard equipment: Railway station, transportation equipment, etc.
Industrial equipment: solar power, wind power, gas discharge lamps, etc.
Office equipment: computer, printer, copy, scanner, etc.
Kitchen appliances: microwave oven, induction cooker, rice cooker, etc.
Household electrical equipment: electric fans, vacuum cleaners, lighting fixtures, etc.
Datasheet:
No |
Field |
Details |
1 |
System |
Rectifier brand |
NASN |
2 |
Dimension (W*D*H)mm for rectifier system |
57×53×20cm |
3 |
Weight |
15KG |
4 |
Cooling mode |
Natural cooling |
5 |
Installation mode |
Installed in 19-inch rack or inside the cabinet or OD rack mountable |
6 |
Cabling mode |
Top inlet and top outlet |
7 |
Maintenance mode |
Front maintenance |
8 |
Potential level |
IP20 |
9 |
AC Distributor |
Input mode |
85 ~ 300 Vrms |
10 |
Phase |
Single/Three phase input, single phase module input |
11 |
Input CB capacity |
1X40A/3P |
12 |
Input frequency |
50Hz ±3% |
13 |
SPD |
40kA (Class B/ Type 2) |
14 |
DC Distributor |
Nominal system voltage |
- 48 V |
15 |
Output voltage |
42 ~ 58V DC, rated value: -54V DC |
16 |
Over voltage protection |
59V |
17 |
Battery CB breakers or Fuse |
2X125A |
18 |
DC contactor |
2 Level: Critical-1 & Non-critical-1 |
19 |
Load breakers (Non-critical-1, LLVD1) |
63Ax1, 32Ax2, 16Ax1 |
20 |
Load breakers (Critical-1, BLVD) |
32Ax2, 16Ax2 |
21 |
Front access MCB arrangement |
All MCM must be front access |
22 |
Additional/Actual load breakers |
Supplier will mention |
23 |
SPD |
Class C/ Type 3 |
24 |
EMI (conducted) |
EN 55022, Class A |
25 |
Rectifiers |
Rectifier maximum capacity |
6 KW (Supplier will mention) |
26 |
|
Sequential start-up/ system soft start |
27 |
|
Redundancy and power capacity supervision |
28 |
|
High efficiency>96% |
29 |
|
Overload protection |
30 |
Rectifier Module |
Input voltage |
85VAC ~ 300VAC, rated 220VAC |
31 |
Module rated power |
1.5KW/1.75KW/2.0 KW |
32 |
THD |
<5% |
33 |
Rectifier module protection |
Protection option must be enable by using Internal fuse or circuit breaker or self protection |
34 |
Rectifier module slot |
4 slots |
35 |
Load sharing |
Load share must be enabled |
36 |
Working temperature |
-50C ~ 700C |
37 |
Module dimension (W*D*H), mm |
Supplier will mention |
38 |
Weight, Kg |
Supplier will mention |
39 |
Power factor |
>0.99 |
40 |
Module visual Indications during operation |
Green: Normal, Yellow: Alarm and Red: Fault |
41 |
Rectifier module |
Hot plugable/ hot-swappable |
42 |
Easy maintenance |
All modules shall be easy installed, removed with safety locked |
43 |
Module restart function |
Each modules shall be start automatically (During power failure and restore) with 60 sec delay. |
44 |
|
Module feature with automatic sleep/wake-up. |
45 |
Battery |
Battery charging function |
The system must have different moods for charging like boost/equalization and float |
46 |
Charging current limitation (0.01C to 1.0C) |
47 |
Low voltage disconnection |
48 |
Backup time supervision |
49 |
Others |
Alarm output |
8 dry contact |
50 |
Communication port |
RS485, SNMP |
51 |
Display mode |
LCD |
52 |
|
Detects the voltage, current and frequency of the AC input |
53 |
|
AC measurement (internal / external) |
54 |
|
Mains failure/phase failure detection and alarming |
55 |
|
Configurable event and data log |
56 |
Environment |
Operating temperature |
-50ºC ~ 75ºC |
57 |
Storage temperature |
-50ºC ~ 75ºC |
58 |
Operating humidity |
5% ~ 95% RH (Non-condensing) |
59 |
Altitude |
0 ~ 3000 m |
60 |
Protection |
Input overvoltage protection |
Protection point: >300VAC |
61 |
Input undervoltage protection |
Protection point: <85VAC |
62 |
Output overvoltage protection |
58.5 ~ 60.5VDC or supplier will mention |
63 |
Over-temperature protection |
Protection point: >75ºC |
64 |
Monitoring |
Rectifier interface |
Digital, CAN-based |
65 |
Local monitoring |
LAN / WEB browser |
66 |
Remote monitoring |
LAN / modem, GSM, GPRS / WEB browser |
67 |
Remote alarming |
Dry contacts / SNMP/SMS |
68 |
Languages |
English |
69 |
Reliability |
MTBF |
≥ 100000 hours |
70 |
Energy savings option |
Options for enable one or more rectifiers module in hibernation based on the actual load power. |
71 |
De-rating factors |
De-rating tables and curves for electric power Rectifier System shall be supplied by the supplier under different ambient temperature, humidity and altitude. |
More details:
Other Popular
PORTABLE EV CHARGER
LOW VOLTAGE 40-100Vdc EV CHARGER
SOLAR EV CHARGING STATION
GRID FREE EV BATTERY STORAGE CHAGER SYSTEM
WALL MOUNTED EV BOX
HIGH POWER PUBLIC COMMERCIAL EV CHARGING STATION
V2V SOLUTION FOR EMERGENCY ON THE ROAD
FAQ
Q1: What kind of EV Charger do you have?AC and DC charger with connectors Type2, CCS1/CCS2, CHAdeMO, GB/T, etc.
Q2: Do you provide customized product?
We provide OEM and ODM services for clients.
Q3: What is the delivery time of EV charger?
About 4-6 weeks.
Q4: What about your warranty of EV Charger?
Generally 2 years. Our warranty period depends on customer's requirements and we always put customer's need as priority.
Q5:How do you package it ?
A:We pack in cartons.
Q6:what's the MOQ?
A:For LOGO, color or other special requirements, a minimum of 20 is required. If you do not have these requirements you can buy
directly, we will ship within 3-10 days.
Q7:Can you produce according to the samples?
A:Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q8:Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery.
Q9:What is your terms of delivery?
A:EXW, FOB, CFR, CIF, DDU.
Q10:What is your terms of payment?
A:We accept all methods of payment: paypal, T/T, credit card, Alibaba assurance, West Union... Please contact us for more details.