Secured Trading Service

48VDC to 12VDC DC-DC Modular Converter 100A

GUANGZHOU NASN POWER CO., LTD
  • Audited Supplier
  • 5 yrs

Contact Supplier

Still deciding? Get samples of $ !
Request Sample

Product Highlights

  • High Efficiency Power Conversion: Efficiency reaches up to 93% with low EMI and high power density.
  • Hot Swappable Modular Design: Supports plug-and-play operation with N+1 redundancy for reliability.
  • Advanced Communication Control: Features RS485 and SNMP protocols for remote monitoring and control.
  • Comprehensive Protection Systems: Includes over/under voltage, short circuit, and over-temperature protection.
  • Wide Input Voltage Range: Operates stably with DC input ranging from 42V to 58V.
  • Flexible Battery Charging Modes: Supports Auto Float and Auto Boost modes for VRLA and conventional batteries.
  • Soft Start Feature: Eliminates starting surges with a slow start circuit within 10-20 seconds.
  • CE Certified Safety: Meets CE safety and EMC certification standards for global compliance.

Shipping

Shipping Cost:
Contact the supplier about freight and estimated delivery time.

Online Trading Protection

Payment Guarantee
T/T PayPal ApplePay GooglePay visa mastercard american express discover JCB diners club PIX SPEI OXXO PSE OZOW Platform-protected payments with refund support for eligible order issues.
Platform Logistics
Clearer shipment tracking with platform-supported logistics.
Inspection Service
Optional pre-shipment inspection for quality and quantity checks.
After-Sales & Dispute Handling
Platform-assisted dispute resolution, including refunds or returns when applicable.

Only orders placed and paid through Made-in-China.com Secured Trading are eligible for payment protection and the corresponding platform services.

Product Images of 48VDC to 12VDC DC-DC Modular Converter 100A

48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A pictures & photos
48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A pictures & photos
48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A pictures & photos
48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A pictures & photos
48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A pictures & photos
48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A pictures & photos
48VDC to 12VDC DC-DC Modular Converter 100A
  • 48VDC to 12VDC DC-DC Modular Converter 100A
  • 48VDC to 12VDC DC-DC Modular Converter 100A
    48VDC to 12VDC DC-DC Modular Converter 100A
  • 48VDC to 12VDC DC-DC Modular Converter 100A
    48VDC to 12VDC DC-DC Modular Converter 100A
  • 48VDC to 12VDC DC-DC Modular Converter 100A
    48VDC to 12VDC DC-DC Modular Converter 100A
  • 48VDC to 12VDC DC-DC Modular Converter 100A
    48VDC to 12VDC DC-DC Modular Converter 100A
  • 48VDC to 12VDC DC-DC Modular Converter 100A
    48VDC to 12VDC DC-DC Modular Converter 100A
  • 48VDC to 12VDC DC-DC Modular Converter 100A
    48VDC to 12VDC DC-DC Modular Converter 100A

Find Similar Products

Product Description

48VDC to 12VDC DC-DC Modular Converter 100A48VDC to 12VDC DC-DC Modular Converter 100ANASN converters 

NASN converters bring advanced technology to the DC power industry. Innovative engineering combines the best in efficiency and reliability to meet the power requirements for a variety of system applications. This rectifier is specifically designed to recharge all types of stationary batteries for large utility, petrochemical and industrial uses.

The fan cooled rectifier module has extremely high density providing the most power in the least amount of space. A compact shelf accommodates two rectifiers per 19in 1U shelf and can be paralleled up to 5*2U 19in shelf.

Local and remote setup, adjustment and control is a simple, single-step process with the rectifier System Controller. By utilizing TCP/IP technology, complete configuration and monitoring of power equipment is possible through a Windows Internet Explorer browser.

We can provide turnkey solutions for outside plant, headend, telecommunications, industrial and renewable energy applications. We work to combine your small-, medium- and large-scale projects with the necessary installation resources. 


Features:

1. Switch Mode Power Supply;
2. Hot swappable and Plug and Play; 
3 .N+1 redundancy,each module available in 50A@12Vdc;
4 .AC /DC distribution system for DC input/ DC output distribution and protection;
5.RS485, SNMP communication for remote control;
6.Compact design and embedded modular system, support power system and module sleep, efficient mixing, energy saving;
7.High Efficiency with low EMI. CE Safety and EMC certification
8.Protection for Input and output over /under voltage,short circuit and over temperature

Applications:
Vehicle and shipboard equipment: Railway station, transportation equipment, etc.
Industrial equipment: solar power, wind power, gas discharge lamps, etc.
Office equipment: computer, printer, copy, scanner, etc.
Kitchen appliances: microwave oven, induction cooker, rice cooker, etc.
Household electrical equipment: electric fans, vacuum cleaners, lighting fixtures, etc.
Datasheet:
Model B48/12-100M2
DC Input voltage 48VDC
DC Input Range 42VDC~58VAC
DC Input Distribution 32A/1P*1+SPD
DC Output voltage -12VDC 
DC Output Distribution Load LLVD:32A/1P*2;Battery 100A/1P*2;SPD IMAX=40KA
DC Output voltage range 10Vdc-14Vdc
Output current 100A
Output Power 1200W
Protections Input over voltage,Input under-voltage protection,Output short-circuit
Protection; Current Limit, Over Temperature, polarity reversal.
Degree of imbalance for equalized current ≤±5%
Phone weighted noise voltage ≤2mV(CCITT)
Peak-peak noise ≤150mV
Wide frequency noise ≤50mV
Discrete noise ≤20mV
Efficiency >=  93%
Dynamic response 20% ~ 100% step load≤200Restoring time≤100uS
Working temperature -20~70ºC
Cooling mode Temperature control fan cooling
MTBF 100,000Hour
Weight 16Kg
Dimension 482*390*88mm

More details:
48VDC to 12VDC DC-DC Modular Converter 100A48VDC to 12VDC DC-DC Modular Converter 100A48VDC to 12VDC DC-DC Modular Converter 100A48VDC to 12VDC DC-DC Modular Converter 100A
The SMPS based CONVERTER should be based on High Frequency (20 KHz and above)
Switch Mode techniques.
Resettable Fuses shall be provided, wherever appropriate, to protect the module against failure
of control / sensing circuit.
The design shall have suitable time delay / hysteresis to avoid hunting during switching ON and
OFF of the system. The module shall disconnect at 150V and reconnect at 170V AC.
Switching ON and OFF the fan shall be temperature controlled. In case of fan failure the module
shall have automatic protection to switch off the module above 70 deg centigrade and restore
automatically with reduction in temperature. It shall not cause any fire hazard. The fan shall also
be protected against short circuit by providing a fuse.
The CONVERTER modules shall have forced cooling and only DC fan shall be used.

DC Output Characteristics
 
The module shall be capable of operating in "Auto Float cum-Boost charger" mode. It shall be
programmed to operate as a float rectifier or a Boost charger depending on the condition of the
battery
 
Auto Float Mode
 
Float voltage of each rectifier module shall be set as given below:
Normal Float & Boost voltage for VRLA battery is 2.25V and 2.3V/Cell respectively.
For conventional battery it shall be 2.15V and 2.42V/cell, respectively.
For 110V/20Amp charger 55cells of 2V each will be used and for 48V/25A charger 24 cells of 2V
each will be used.
The module should have a range from 2.0 - 2.3V/cell in float mode & 2.2 - 2.5V/cell in boost
mode to meet the requirement of VRLA as well as conventional batteries.
The DC output voltage shall be maintained within ± 1% of the half load pre-set voltage in the
range 25% load to full load when measured at the output terminals over the full specified input
range.

Auto Boost Charge Mode
 
In auto boost charge mode, CONVERTER shall supply battery and equipment current till
terminal voltage reaches 2.3V (VRLA battery) /2.42V (Low Maintenance battery) per cell.and
shall change over to Auto Float mode after a defined delay of 0, 1, 2, 4 hours adjustable, to be
set as per battery manufacturer's specification.
 
Efficiency
The efficiency and Power factor of the CONVERTER in auto float and auto boost mode shall be
as follows:
Nominal input - 150-275V
Output - Full Load, Efficiency > 90% and Power factor >0.95 to unity
And for
Nominal input - 150-275V
Output - 25% to 100%, Efficiency > 85% and Power factor >0.9
Note: Active power factor correction circuit shall be adopted.
 
Total Harmonic Distortion
The total line harmonic voltage distortion shall not be more than 10%.
The total current harmonic distortion contributed by CONVERTER at the input shall not exceed
10% for all input condition and load 50% to 100% of the rated capacity.
 
Soft Start Feature
Slow start circuitry shall be employed such that CONVERTER module output voltage shall reach
its nominal value slowly within 10 to 20 seconds, eliminating all starting surges.
The maximum instantaneous current during start up shall not exceed the peak value of the
rectifier-input current at full load at the lowest input voltage specified.
 
Voltage Overshoot/Undershoot (with battery disconnected)
The CONVERTER modules shall be designed to minimize output voltage overshoot /
undershoot such that when they are switched ON, the DC output voltage shall be limited to ± 5%
of the set voltage and return to its steady state within 20 millisecond for any load of 25% to
100%.
The DC output voltage overshoot for a step change in AC mains from 150V to 275V shall not
cause shut down of CONVERTER module and the voltage overshoot shall be limited to ±5% of
its set voltage and return to steady state within 20ms.
The modules shall be designed such that a step load change of 25% to 100% or vice- versa
shall not result in DC output voltage overshoot/undershoot of not more than ±5% of the set value
and return to steady state value within 10 millisecond without resulting the unit to trip.
 
Parallel Operation
The CONVERTER modules shall be suitable for operating in parallel on active load sharing
basis with one or more modules of same type, make and rating.
The current sharing shall be within ± 10% of the individual capacity of each CONVERTER in the
system when loaded between 50 to 100% of its rated capacity.
 
Alarms & Indication of CONVERTER
The following indications, controls & measuring points shall be provided on the front panel of
CONVERTER
 
a) CONVERTER on Auto Float mode FLOAT Green
b) CONVERTER on Boost Charge mode BOOST Green
c) Mains available MAINS Amber
 
Alarm Indication with LED:
a) Rectifier module over voltage OVER VOLTAGE Red
b) Rectifier module under-voltage UNDER VOLTAGE Red
c) DC output fail OUTPUT FAIL Red
d) CONVERTER Overload/ short circuit OVERLOAD/ SHORT CIRCUIT Red
e) Fan fail FAN FAIL Red
Note: "Provision shall be made for stopping the audio alarm with a non-locking push button.
a) Float voltage adjustment (float)
b) Boost voltage adjustment (boost)
c) Overload current setting (OL)
d) Voltage monitoring point suitable for measurement by standard multimeter.
 

Rack Mounted 220VDC Rectifier with Parallel Charging Converter

Switch Mode Power Supply 110VDC Rectifier System

Telecom DC-AC Inverters 48V DC

off Grid Inverter Telecom Rack-Mounted Telecom Inverters

Utility Power Inverter 110VDC to 220VDC Power Inverter

Industrial Rectifier Battery Charger

3.5′ ′ Screen 220VDC Rectifier System From Manufacturer

Telecommunications Battery Rectifier 24V Base Station DC Power Charger

48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A
48VDC to 12VDC DC-DC Modular Converter 100A
FAQ

Q1: What kind of EV Charger do you have?AC and DC charger with connectors Type2, CCS1/CCS2, CHAdeMO, GB/T, etc.

Q2: Do you provide customized product?
We provide OEM and ODM services for clients.

Q3: What is the delivery time of EV charger?

About 4-6 weeks.
Q4: What about your warranty of EV Charger?
Generally 2 years. Our warranty period depends on customer's requirements and we always put customer's need as priority.

Q5:How do you package it ?
A:We pack in cartons.

Q6:what's the MOQ?
A:For LOGO, color or other special requirements, a minimum of 20 is required. If you do not have these requirements you can buy
directly, we will ship within 3-10 days.

Q7:Can you produce according to the samples?
A:Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q8:Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery.

Q9:What is your terms of delivery?
A:EXW, FOB, CFR, CIF, DDU.

Q10:What is your terms of payment?
A:We accept all methods of payment: paypal, T/T, credit card, Albaba assurance, West Union... Please contact us for more details.

 

About the Supplier

This supplier has been audited by BV. Verify the report on the official BV website with ID "MIC-ASR251092". Items marked "verified" are certified.

Watch Video
Watch Video
GUANGZHOU NASN POWER CO., LTD
GUANGZHOU NASN POWER CO., LTD
GUANGZHOU NASN POWER CO., LTD
GUANGZHOU NASN POWER CO., LTD
GUANGZHOU NASN POWER CO., LTD
GUANGZHOU NASN POWER CO., LTD
GUANGZHOU NASN POWER CO., LTD
GUANGZHOU NASN POWER CO., LTD

About Our Factory & Business Background

verified Business Type
Manufacturer/Factory & Trading Company
Address
Building 1, 1st Floor, Meiju Center, Guanghua Road #168, Huadu District, Guangzhou, Guangdong, China
verified Plant Area
960 square meters
verified Registered Capital
1,000,000 RMB
verified Terms of Payment
T/T
verified International Commercial Terms(Incoterms)
FOB, CIF, CFR, EXW
verified Average Lead Time
Peak Season Lead Time: within 15 workdays, one month
Off Season Lead Time: within 15 workdays, one month
verified Nearest Port
Guangzhou Port, Shenzhen Port
verified Supply Chain Partners
15

Our Production Capability & Technical Expertise

verified Main Products
Battery Powered Speaker, Solar Charging Stations, V2h, Emergency EV Charger System, Media Screen EV Charger, Portable DC Fast EV Charger, DC rectifier system, telecom inverter, STS, UPS
verified Production Lines
1
verified Production Machines
Magnetizing equipment
verified QA/QC inspectors
1 people
verified Inspection Type for Finished Products
100% inspection(Visual inspection & Function inspection)
verified Inspection Method for Finished Products
Have instructions and uniformly followed
verified Customization Options
Customization from Samples, Customization from Designs, Full Customization, Minor Customization, Flexible customization
verified ODM Service Available
Yes
verified OEM Service Available
Yes
verified R&D Engineers
1 people
verified Traceability of Raw Materials
Yes
verified Own Brand
Yes

Our Industry Experience & Global Business Record

verified Year of Establishment
2015-01-06
verified Export Year
10 years
verified Main Markets
South America, Europe, Southeast Asia/ Mideast
verified Repeat Buyers Choice
80%~100%
verified Number of Foreign Trading Staff
3
verified Overseas Agent/Branch
No
verified New Products Launched in Last year
Yes

Our Certifications, Standards & Industry Recognition

verified Management System Certification
ISO9001:2015
verified Cooperated with Fortune 500
No

FAQ

What kind of EV Charger do you have?
AC and DC charger with connectors Type2, CCS1/CCS2, CHAdeMO, GB/T, etc.
Do you provide customized product?
We provide OEM and ODM services for clients.
What is the delivery time of EV charger?
About 4-6 weeks.
What about your warranty of EV Charger?
Generally 2 years. Our warranty period depends on customer's requirements and we always put customer's need as priority.
How do you package it?
We pack in cartons.
What's the MOQ?
For LOGO, color or other special requirements, a minimum of 20 is required. If you do not have these requirements you can buy directly, we will ship within 3-10 days.
Can you produce according to the samples?
Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Do you test all your goods before delivery?
Yes, we have 100% test before delivery.
What is your terms of delivery?
EXW, FOB, CFR, CIF, DDU.
What is your terms of payment?
We accept all methods of payment: paypal, T/T, credit card, Albaba assurance, West Union... Please contact us for more details.

Send your message to this supplier

Contact Information
Recipient
Message

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now