110VAC 2u Sts Dual Power Input Static Transfer Switch 80A

• Customization: Available
• Output Type: Single
• Warranty: 1 Year
• Model NO.: STS 80A EML
• Output Power: 9500W
• Input Voltage: 90-130V
• Connection Mode: Wire
• Starting Mode: Self-excited Switching Power Supply
• Voltage Regulating Mode: Frequency Modulation Type
• Power Supplying System: Terminal Power Distribution Equipment
• Energy Transmission: One-way Transmission
• Modulation System: PWM
• Certification: CE
• Brand: Nasn
• Application for: Telecom Equipment,Battery Charging
• Input: Single Phase 110V
• Output: 110VAC
• Output Current: 80A
• Protection: High Tempeturer Protection
• Factory: China Factory Supply
• Used for: Data Center and It Power Solutions
• LCD Screen: Optional
• Support: OEM/ODM
• Package: Carton Box
• Communication: 485 232
• Additive Function: Snmp
• Name: Static Transfer Switch
• Tranfer Time: Less Than 4ms
• Installation Mode: Rack Mounted
• Transport Package: Carton
• Specification: 53.8*44*28cm
• Trademark: NASN
• Origin: China
• HS Code: 8504401990
• Production Capacity: 200/Month
• Package Size: 54.00cm * 44.00cm * 28.00cm
• Package Gross Weight: 12.000kg

Product Description

NASN Static Transfer System  

In many important occasions, the reliability of the load of electricity consumption is very important. In order to improve the reliability of the load, the general power supply system adopts dual power supply, such as dual main power, one main power and UPS. However, the more reliable method is to use dual UPS power supply, such as many IDC computer rooms, bank business outlets, telecommunications, mobile, and many important loads in the power systems. For dual power supply, how to safely, quickly and effectively switch directly affect load reliability, especially many equipment acceptable outage time is extremely demanding, such as: outage time cannot exceed 10ms, in the face of this requirement, ordinary ATS mechanical contacts is not bear, and high speed static no contact STS and rapid power detection can quickly, safely and effectively realize double power switch.


Features:

1. Adopting fully digital control, with strong anti-interference ability and fast operation speed 

2. Switching time ≤ 4ms, high reliability; 

3. Strong overload capacity, able to withstand full load startup; 

4. Equipped with input overvoltage, undervoltage, overcurrent and other protection functions; 

5. The front panel is equipped with a display screen and indicator lights to intuitively understand the STS status information; 

6. Provide STS versions that can switch between live and zero lines simultaneously, with identical appearance, structure, and performance.

Applications:
Vehicle and shipboard equipment: Railway station, transportation equipment, etc.
☎Industrial equipment: solar power, wind power, gas discharge lamps, etc.
☎Office equipment: computer, printer, copy, scanner, etc.
☎Kitchen appliances: microwave oven, induction cooker, rice cooker, etc.
☎Household electrical equipment: electric fans, vacuum cleaners, lighting fixtures, etc.

Datasheet:

Model Number		STS80EM
Switch Time		≤4ms
Input	Rated Voltage(VAC)	110
	Input Voltage Range(VAC)	90~130
	Rated Frequency(Hz)	50
	Power Factor	1
	Automatic conversion threshold voltage	Undervoltage:90Vac±5Vac;Overvoltage:130Vac±5Vac
	Automatic conversion threshold Frequency	Lower than:45Hz±0.2Hz;Higher:65Hz±0.2Hz
	Over limit protection shutdown threshold voltage	≤160Vac or ≥265Vac,±5V
	Over limit protection shutdown threshold Frequency	≤45Hz or ≥65Hz,±0.2Hz
	Overload capacity	Continuous working @Load current≤110%; shut off @load current>110%
Output	Rated output current(A)	80
	Max output current(A)	80
	Output power (VA/W)	9500
Environment	Dielectric Strength	2KVAC,1min
	Noise(1m)	≤55dB
	Working Temperature	-25~50ºC
	Storage Temperature	-40~70ºC
	Humidity	0~90%,No condensation
	Protection Degree	IP20
	Altitude(m)	≤3000
		2000~3000m;Output derate by 2% for every 100m increase
Protection Function		Input undervoltage and overvoltage protection, output overload protection, over temperature protection, short circuit protection

More details:

The SMPS based CONVERTER should be based on High Frequency (20 KHz and above)

Switch Mode techniques.

Resettable Fuses shall be provided, wherever appropriate, to protect the module against failure

of control / sensing circuit.

The design shall have suitable time delay / hysteresis to avoid hunting during switching ON and

OFF of the system. The module shall disconnect at 150V and reconnect at 170V AC.

Switching ON and OFF the fan shall be temperature controlled. In case of fan failure the module

shall have automatic protection to switch off the module above 70 deg centigrade and restore

automatically with reduction in temperature. It shall not cause any fire hazard. The fan shall also

be protected against short circuit by providing a fuse.

The CONVERTER modules shall have forced cooling and only DC fan shall be used.

DC Output Characteristics
 

The module shall be capable of operating in "Auto Float cum-Boost charger" mode. It shall be

programmed to operate as a float rectifier or a Boost charger depending on the condition of the

battery
 

Auto Float Mode
 

Float voltage of each rectifier module shall be set as given below:

Normal Float & Boost voltage for VRLA battery is 2.25V and 2.3V/Cell respectively.

For conventional battery it shall be 2.15V and 2.42V/cell, respectively.

For 110V/20Amp charger 55cells of 2V each will be used and for 48V/25A charger 24 cells of 2V

each will be used.

The module should have a range from 2.0 - 2.3V/cell in float mode & 2.2 - 2.5V/cell in boost

mode to meet the requirement of VRLA as well as conventional batteries.

The DC output voltage shall be maintained within ± 1% of the half load pre-set voltage in the

range 25% load to full load when measured at the output terminals over the full specified input

range.

Auto Boost Charge Mode
 

In auto boost charge mode, CONVERTER shall supply battery and equipment current till

terminal voltage reaches 2.3V (VRLA battery) /2.42V (Low Maintenance battery) per cell.and

shall change over to Auto Float mode after a defined delay of 0, 1, 2, 4 hours adjustable, to be

set as per battery manufacturer's specification.
 

Efficiency

The efficiency and Power factor of the CONVERTER in auto float and auto boost mode shall be

as follows:

Nominal input - 150-275V

Output - Full Load, Efficiency > 90% and Power factor >0.95 to unity

And for

Nominal input - 150-275V

Output - 25% to 100%, Efficiency > 85% and Power factor >0.9

Note: Active power factor correction circuit shall be adopted.
 

Total Harmonic Distortion

The total line harmonic voltage distortion shall not be more than 10%.

The total current harmonic distortion contributed by CONVERTER at the input shall not exceed

10% for all input condition and load 50% to 100% of the rated capacity.
 

Soft Start Feature

Slow start circuitry shall be employed such that CONVERTER module output voltage shall reach

its nominal value slowly within 10 to 20 seconds, eliminating all starting surges.

The maximum instantaneous current during start up shall not exceed the peak value of the

rectifier-input current at full load at the lowest input voltage specified.
 

Voltage Overshoot/Undershoot (with battery disconnected)

The CONVERTER modules shall be designed to minimize output voltage overshoot /

undershoot such that when they are switched ON, the DC output voltage shall be limited to ± 5%

of the set voltage and return to its steady state within 20 millisecond for any load of 25% to

100%.

The DC output voltage overshoot for a step change in AC mains from 150V to 275V shall not

cause shut down of CONVERTER module and the voltage overshoot shall be limited to ±5% of

its set voltage and return to steady state within 20ms.

The modules shall be designed such that a step load change of 25% to 100% or vice- versa

shall not result in DC output voltage overshoot/undershoot of not more than ±5% of the set value

and return to steady state value within 10 millisecond without resulting the unit to trip.

 

Parallel Operation

The CONVERTER modules shall be suitable for operating in parallel on active load sharing

basis with one or more modules of same type, make and rating.

The current sharing shall be within ± 10% of the individual capacity of each CONVERTER in the

system when loaded between 50 to 100% of its rated capacity.
 

Alarms & Indication of CONVERTER

The following indications, controls & measuring points shall be provided on the front panel of

CONVERTER
 

a) CONVERTER on Auto Float mode FLOAT Green

b) CONVERTER on Boost Charge mode BOOST Green

c) Mains available MAINS Amber
 

Alarm Indication with LED:

a) Rectifier module over voltage OVER VOLTAGE Red

b) Rectifier module under-voltage UNDER VOLTAGE Red

c) DC output fail OUTPUT FAIL Red

d) CONVERTER Overload/ short circuit OVERLOAD/ SHORT CIRCUIT Red

e) Fan fail FAN FAIL Red

Note: "Provision shall be made for stopping the audio alarm with a non-locking push button.

a) Float voltage adjustment (float)

b) Boost voltage adjustment (boost)

c) Overload current setting (OL)

d) Voltage monitoring point suitable for measurement by standard multimeter.

Other Popular

FAQ

Q1: What kind of EV Charger do you have?AC and DC charger with connectors Type2, CCS1/CCS2, CHAdeMO, GB/T, etc.

Q2: Do you provide customized product?
We provide OEM and ODM services for clients.

Q3: What is the delivery time of EV charger?

About 4-6 weeks.
Q4: What about your warranty of EV Charger?
Generally 2 years. Our warranty period depends on customer's requirements and we always put customer's need as priority.

Q5:How do you package it ?
A:We pack in cartons.

Q6:what's the MOQ?
A:For LOGO, color or other special requirements, a minimum of 20 is required. If you do not have these requirements you can buy
directly, we will ship within 3-10 days.

Q7:Can you produce according to the samples?
A:Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q8:Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery.

Q9:What is your terms of delivery?
A:EXW, FOB, CFR, CIF, DDU.

Q10:What is your terms of payment?
A:We accept all methods of payment: paypal, T/T, credit card, Albaba assurance, West Union... Please contact us for more details.