Customized Voltage Rectifier Power System 220VAC 110VDC 20A Telecom Rectifier

Product Description

NASN rectifiers 

NASN rectifiers bring advanced technology to the DC power industry. Innovative engineering combines the best in efficiency and reliability to meet the power requirements for a variety of system applications. This rectifier is specifically designed to recharge all types of stationary batteries for large utility, petrochemical and industrial uses.

The fan cooled rectifier module has extremely high density providing the most power in the least amount of space. A compact shelf accommodates four rectifiers per 19in 2U shelf and can be paralleled up to 5*2U 19in shelf.

Local and remote setup, adjustment and control is a simple, single-step process with the rectifier System Controller. By utilizing TCP/IP technology, complete configuration and monitoring of power equipment is possible through a Windows Internet Explorer browser.

We can provide turnkey solutions for outside plant, headend, telecommunications, industrial and renewable energy applications. We work to combine your small-, medium- and large-scale projects with the necessary installation resources. 

Features:

1. Switch Mode Power Supply;
2. Hot swappable and Plug and Play; 
3 .N+1 redundancy,each module available in 20A@110Vdc;
4 .AC /DC distribution system for AC input/ DC output distribution and protection;
5.RS232, RS485, SNMP communication for remote control;
6.Compact design and embedded modular system, support power system and module sleep, efficient mixing, energy saving;
7.High Efficiency with low EMI. CE Safety and EMC certification
8.Protection for Input and output over /under voltage,short circuit and over temperature

Applications:
Vehicle and shipboard equipment: Railway station, transportation equipment, etc.
☎Industrial equipment: solar power, wind power, gas discharge lamps, etc.
☎Office equipment: computer, printer, copy, scanner, etc.
☎Kitchen appliances: microwave oven, induction cooker, rice cooker, etc.
☎Household electrical equipment: electric fans, vacuum cleaners, lighting fixtures, etc.

Datasheet:

MODEL		A220/110-20M1	A220/110-40M2	A380/110-60M3	A380/110-100M5	A380/110-140M7
Configuration		1pcs 110V/20A module +1pcs monitor	2pcs 110V/20A module +1pcs monitor	3pcs 110V/20A module +1pcs monitor	5pcs 110V/20A module +1pcs monitor	7pcs 110V/20A module +1pcs monitor
Environmental	Operating temperature	-40°C ~ 55°C
	Storage temperature	-40°C ~ 70°C
	Relative humidity	≤ 90%RH (30°C)
	Communication	RS485 or SNMP
	Altitude	≤ 2000m (derating is necessary above 2,000m)
AC Input	AC input system	L+N+PE/220Vac		L1+L2+L3+N/380Vac
	Input voltage range	90VAC ~ 280VAC		323-437VAC
	Input AC voltage frequency	45Hz ~ 65Hz
	Max input current	≤28.4A
	Power factor	≥ 0.99
DC Output	Nominal output voltage	110VDC
	Rated output voltage	121VDC
	Rated Output Capacity	2.5kW	5kW	7.5kW	12.5kW	17.5kW
	Output DC voltage	90VDC ~ -150VDC
	Output DC current	20A	40A	60A	100A	140A
	Voltage set-point accuracy	≤ 1%
	Efficiency	≥ 93.2%
	Noise (peak-peak)	≤ 200mV (0 ~ 20MHz)
	Weighted noise	≤ 2mV (300Hz ~ 3400Hz)
AC Input Alarm and Protection	AC input over-voltage alarm point	Default: 280VAC ± 5VAC*
	AC input under-voltage alarm point	Default: 176VAC ± 5VAC
	AC input over-voltage protection recovery difference	Default: 295VAC ± 5VAC, 10VAC lower than the AC input over-voltage protection point
	AC input under-voltage protection point	Default: 180VAC ± 5VAC*
DC Output Alarm And Protection	DC output over-voltage alarm point	Default:149VDC ± 0.5VDC*
	DC output under-voltage alarm point	Default:90VDC ± 0.5VDC*
	DC output over-voltage protection point	Default: 97.2VDC ± 0.5VDC*
	LLVD	Default: 99VDC ± 0.5VDC*
	BLVD	Default: 97.2VDC ± 0.5VDC*
Rectifier	Load sharing	The rectifiers can work in parallel and share the current. The unbalance is better than ± 5% rated output current.
	Derated by input (at 45°C)	The rectifier can output power of 100% with input voltage of ≥154VAC; The rectifier can output power capacity 1200W with input voltage <154VAC; Rectifiers under-voltage stop with input voltage of 85VAC

More details:

Other Popular
 

FAQ

Q1: What kind of EV Charger do you have?AC and DC charger with connectors Type2, CCS1/CCS2, CHAdeMO, GB/T, etc.

Q2: Do you provide customized product?
We provide OEM and ODM services for clients.

Q3: What is the delivery time of EV charger?

About 4-6 weeks.
Q4: What about your warranty of EV Charger?
Generally 2 years. Our warranty period depends on customer's requirements and we always put customer's need as priority.

Q5:How do you package it ?
A:We pack in cartons.

Q6:what's the MOQ?
A:For LOGO, color or other special requirements, a minimum of 20 is required. If you do not have these requirements you can buy
directly, we will ship within 3-10 days.

Q7:Can you produce according to the samples?
A:Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q8:Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery.

Q9:What is your terms of delivery?
A:EXW, FOB, CFR, CIF, DDU.

Q10:What is your terms of payment?
A:We accept all methods of payment: paypal, T/T, credit card, Albaba assurance, West Union... Please contact us for more details.